Naphtha: The Son of Crude Oil, The Great-Grandfather of PTA-How Much Do You Know?
In the vast family derived from crude oil, the most well-known members may be gasoline, diesel, and kerosene-energy products commonly seen in our daily lives. However, this less famous offspring is also involved in various aspects of our lives-it is naphtha.
The chemical fiber clothes we wear, mineral water bottles, plastics, and various other chemical products mostly originate from this less renowned child. To some extent, setting aside its father-crude oil-it is fair to call it the ancestor of most chemical products. Hence, it is also known as chemical light oil.
The name "naphtha" might sound simple, clumsy, and even a little cute at first glance. But this name was not chosen arbitrarily. There are two explanations for its name: One is that naphtha has a relatively low boiling point and is usually extracted from the upper part of the distillation tower during petroleum production. Since the brain is also located in the upper part of the human body, it was named "naphtha" accordingly. Another explanation is that the English name "naphtha" has a syllable similar to the pronunciation of "脑" (nǎo) in Chinese, likely a transliteration adopted when translating foreign literature.
1. Modern Refinery Crude Oil Processing
To explain how naphtha is produced from its father, crude oil, is a long story. In short, naphtha is an intermediate product of petroleum refining and a mixture of hydrocarbons. Modern crude oil refining is an integrated process: crude oil passes through a large integrated unit, undergoing physical processes and chemical reactions to ultimately separate various primary and secondary products. In addition to common products like gasoline, diesel, kerosene, liquefied petroleum gas, fuel oil, asphalt, lubricating oil, and coke, there is also naphtha-an intermediate product unknown to many. Further processing of naphtha yields benzene, mixed xylene (aromatics), and ethylene, propylene, and butadiene (olefins).
2. Two Major Sources and Classification of Naphtha
I. Produced from primary distillation of crude oil:
The yield of naphtha varies depending on the quality of the crude oil. Poor-quality crude oil yields 2-3%, medium-quality yields 20-30%, and special types can yield 60-70%. This type is called straight-run naphtha.
II. Naphtha produced from secondary processing:
Naphtha produced through hydrocracking, primarily hydrocracked naphtha. This type has good properties with low sulfur and nitrogen content.
Additionally, naphtha is traditionally classified by distillation range and usage:
Light naphtha: Distillation range 30–90°C, density 0.69 g/cm³, sulfur content 0.1%. It is generally used as cracking feedstock for producing ethylene or as a gasoline blending component.
Heavy naphtha: Distillation range 80–180°C, density 0.72 g/cm³, sulfur content 0.3%. It is mainly used as catalytic reforming feedstock.
However, naphtha is a mixture. In practical procurement of naphtha feedstock, it is important to avoid simply classifying it as "light" or "heavy" and to pay attention to its main components. Different applications require significantly different hydrocarbon compositions of naphtha, and the composition of naphtha feedstock greatly affects the yield of the desired end products. Only by doing so can limited naphtha resources be efficiently utilized to maximize profits.
3. Three Major Uses of Naphtha
Catalytic reforming feedstock: Accounts for about 40% of domestic demand. Catalytic reforming produces aromatic products like benzene, toluene, and xylene. These products are primarily used to produce PX, which is then used to make PTA.
Cracking feedstock: Accounts for about 58% of domestic demand. Cracking produces olefins like ethylene, propylene, and butadiene. Among these, ethylene cracking demand is the highest, accounting for about 39% of total naphtha demand.
As a solvent: Used as a raw material for petroleum resins, a solvent for paints, pesticide emulsifiers, and silver powder rolling paste.
4. Naphtha and PTA
Crude oil undergoes certain processes to produce naphtha. MX (mixed xylene) is refined from naphtha, and PX (paraxylene) is further refined from MX. PTA is produced using PX (accounting for 65%–67% of the formula) as the raw material and acetic acid as the solvent. With the action of a catalyst, it is oxidized with air (oxygen accounting for 35%–33%) to generate crude terephthalic acid. The crude terephthalic acid is then hydrogenated and refined to remove impurities, followed by crystallization, separation, and drying to produce the final purified terephthalic acid product-PTA.
