N- (tert-Butoxycarbonyl) Glycine Tert-Butyl Ester CAS 111652-20-1

N- (tert-Butoxycarbonyl) Glycine Tert-Butyl Ester CAS 111652-20-1
Details:
EPOXY FATTY ACID METHYL ESTER Standard: accordant to Q/JAAO2012-018 Usage and Dosage: Jointly used with polyester plasticizers, it can reduce their mobility, while with metal heat stabilizers, it would greatly enhance their stability, and the dosage of these metal stabilizers necessary can be...
Send Inquiry
Download
Description
Technical Parameters

Phthalate free plasticizers for pvc

Standard: accordant to Q/JAAO2012-018

ITEMS

STANDARD

J107

J108

Color Shade (pt-co)

=150

=80

Epoxy Value (%)

ASTMD1652-04

4.1

4.6

Density (20?, g/cm3)

0.915-0.938

0.925-0.945

Iodine Value (%)

6.0

Acid Value(mg KOH/g)

=0.5

Moisture Content(%)

=0.5

Flash Point (?)

=170

=175

Usage and Dosage:

Jointly used with polyester plasticizers, it can reduce their mobility, while with metal heat stabilizers, it would greatly enhance their stability, and the dosage of these metal stabilizers necessary can be reduced to only one third of that used alone. As far as compatibility with PVC, ESO is equivalent to DOP and is better in terms of plasticizing efficiency. Thus the total need of plasticizers would be less. It does not only bring down the cost, but also improves the technical standard of our products, such as the tolerance of impact, transparency, printability, weld ability and so on. 5~10 portion of ESO would remarkably ameliorate the heat and light stability of soft products. Under special situation, 10~30 portion of ESO used non-open-air, no other stabilizers is necessary. The addition of this chemical, will cut down the amount of other plasticizers, stabilizers and lubricants needed.

Package: net weight 200KG iron drum, 1000KG IBC tank or Flexi-bag in Bulk

Storage: over 1 years normally

Why choose us?

Polyvinyl chloride (PVC) is one of the most widely used plastics in the world.  Rising demand for flexible polyvinyl chloride (PVC) contributing to the growth of the plasticizers market. Flexible PVC is softer than unplasticized polyvinyl chloride (uPVC) due to the addition of plasticizers. Increasing demand for flexible PVC material in various end-use industries, drives the demand for plasticizers. 

 

Phthalates plasticizers are the most commonly used plasticizers due to easy availability and low cost. However, the strict regulations on using phthalates plasticizers is limiting the growth of the plasticizers market. Lots of companies are moving away from phthalate plasticizers as the number of studies reveal the health effects caused due to the use of phthalates plasticizers.

 

Zhejiang Jiaao Enprotech Stock Co.,Ltd. was founded in 2003, listed in Shanghai Stock Exchange, specializing in research, producing and sales of environment friendly plasticizers.  All Jiaao's products are non-phthalate and can meet the regulation of REACH. 



 

Hot Tags: phthalate free plasticizers for pvc, China phthalate free plasticizers for pvc manufacturers, suppliers, factory, alternative car fuels, biodiesel alternative fuel, eco dehch, pure soybean oil, commercial biodiesel, Stabilizer

Send Inquiry